Monday, March 22, 2010

De Palma sheet metal


After I mocked up the giveaway bike,the parts I built(fuel tank,oil bag, and fitted fender)got a skim coat of filler by me and a rough sand,it is headed out for paint,you can now see the tank on De Palmas site,take a look!SLIM

4 comments:

  1. Hey ya skinny bastard,saw this and entered the giveaway. If I win,I'll make it a point to cruise to your pad and hang out. You need to come up Friday to the Past Pleasures cruise night at Vons. Bring the street sweeper out,it would scare some of those folks shitless,haha.

    See you soon hopefully
    ~Grimm~

    ReplyDelete
  2. I appreciate with your De Palma Sheet Metal Fabrications design. It's very innovative idea.

    ReplyDelete
  3. Welding is the main focus of steel fabrication. When we done in Sheet Metal Fabrication Company the formed and machined parts will be assembled and tack welded into place then re-checked for accuracy. A fixture may be used to locate parts for welding if multiple weldments have been ordered.The welder then completes welding per the engineering drawings, if welding is detailed or per his own judgment if no welding details are provided.Special precautions may be needed to prevent warping of the weldment due to heat. These may include re-designing the weldment to use less weld, welding in a staggered fashion, using a stout fixture, covering the weldment in sand during cooling, and straightening operations after welding.Straightening of warped steel weldments is done with an Oxy-acetylene torch and is somewhat of an art. Heat is selectively applied to the steel in a slow, linear sweep. The steel will have a net contraction, upon cooling, in the direction of the sweep. A

    ReplyDelete
  4. Nice blog to be honest and would like to share this you can also refer this Sheet Metal Fabrication Hyderabad

    ReplyDelete