After I mocked up the giveaway bike,the parts I built(fuel tank,oil bag, and fitted fender)got a skim coat of filler by me and a rough sand,it is headed out for paint,you can now see the tank on De Palmas site,take a look!SLIM
Subscribe to:
Post Comments (Atom)
Hey ya skinny bastard,saw this and entered the giveaway. If I win,I'll make it a point to cruise to your pad and hang out. You need to come up Friday to the Past Pleasures cruise night at Vons. Bring the street sweeper out,it would scare some of those folks shitless,haha.
ReplyDeleteSee you soon hopefully
~Grimm~
I appreciate with your De Palma Sheet Metal Fabrications design. It's very innovative idea.
ReplyDeleteWelding is the main focus of steel fabrication. When we done in Sheet Metal Fabrication Company the formed and machined parts will be assembled and tack welded into place then re-checked for accuracy. A fixture may be used to locate parts for welding if multiple weldments have been ordered.The welder then completes welding per the engineering drawings, if welding is detailed or per his own judgment if no welding details are provided.Special precautions may be needed to prevent warping of the weldment due to heat. These may include re-designing the weldment to use less weld, welding in a staggered fashion, using a stout fixture, covering the weldment in sand during cooling, and straightening operations after welding.Straightening of warped steel weldments is done with an Oxy-acetylene torch and is somewhat of an art. Heat is selectively applied to the steel in a slow, linear sweep. The steel will have a net contraction, upon cooling, in the direction of the sweep. A
ReplyDeleteNice blog to be honest and would like to share this you can also refer this Sheet Metal Fabrication Hyderabad
ReplyDelete