This is a evo sportster frame Fabbed here at the Farm for the Gasser Lounge,Lady Hump,and Sailor Jerry. Mike in the far right of the picture came up with some pretty detailed specs and we handled it.It received a tight loop hardtail,3 3/8 inches of downtube stretch, a fresh back bone, 2 degrees of rake change and a slimsfab high capacity keg oil bag.Keep an eye out for this build.The guys pictured from right to left are Mike Torres, Alan from Lady Hump,Mikey from gasser Lounge,and James. I am the asshole with the camera you cant see. the last shot is a before shot! Slim 951 217 8814
This is Robs shovelhead.He came by the Farm for a hardtail ,fender,sissy bar,and to have his oil bag installed.The hardtail on this bike is stock length.The bikes battery tray is set up for an Antigravity battery(12 cell) as most of the bikes that leave here are.They are very compact and light weight with extreme power and consistency. Slim 951 217 8814
This is Soto and his looptail sportster.a few posts ago you can see his bike before he chromed the oil bag, bars and fender, built here at the Farm.He came out to hang and I fabbed him up this bad ass sissy that holds his board in place on rides to local skate spots. Soto rides this bike as primary transportation.Ride or Die Mother Fucker.Slim
Here are some shots of the Drivetrain in my van. It is powered by a big block Mopar RB engine backed up by a 727 torqueflite trans through a telescoping driveline to a 1959 Hallcraft V drive, through another telescoping driveline to a 10 bolt chevy rearend. I fabbed hard cooling lines from .095 wall mild steel mounted along the driverside framerail. The fuel tank in the pics is NOT mounted but will be soon mounted under the floor with the cap entering up through the floorboard. the sheetmetal floorwork and seat are underway and then test drives are up next, then a roof.
These bars I wanted to have the early "casting look" to fit the style of Dana s bike. you can see the sleeving work before cleanup in the last picture. the bars were coated with appliance epoxy black. slim 951 217 8814
This is Peters 2003 sportster it came in stock and left with a hardtailed frame,radiused fender,southbay styled sissy bar,friscoed sporty tank,dished sidefill oil bag,and a set of swept mid pipes.. The rabbit ear bars were not installed but will be on this bike soon. Slim 951 217 8814
These are some oil bags( dished,pill style,and flatside) ,rabbit ear bars, H bars,bolt on rubber mount sissys these are some of the items that we make here at the Farm.Slim 951 217 8814 this load went to Adam at 24 cycles in the San Diego area.
This is a tank I friscoed for a guy named Fats.He wanted some light scrollwork to mold and paint this is what I came up with.His Ironhead was fabbed here at the Fab Farm but has not yet been posted. Slim 951 217 8814
This is Mikes Ironhead. He dropped by his bike for a stock length hardtail and an oil bag. The oil bag has a compartment sized for a 12 cell ANTIGRAVITY battery( lith ion).t5he oil bag I loosely shaped off of an early sporty but it needed more depth for the cell.I also mounted the fender .Kutty from HippyKiller Garage will be building the sissy and such next. Slim 951 217 8814
I am a proud American who supports the working class lifestyle,steel fabrication is my living,My specialty is steel on wheels,respect and consideration! I live in redlands cali, and work out of my house/shop.