Monday, January 14, 2013

Slimsfab shovel hardtail

 This is a Shovelhead frame That Adam from 24 CYCLES brought in to be hardtailed.This is the Frame before and after.The frame has no stretch. I kept the stock forging on the upper seatpost and integrated it into the rear section for a clean look.SLIM 951 217 8814


3 comments:

  1. why are the axle adjusters in the back?
    or are you going to double them up?
    (front and back)

    ReplyDelete
  2. Nice post...like your blog..very informative..thanks!!


    plasma welding machines

    ReplyDelete
  3. Hi josh the axle plates are set up for rear pull axle adjusters

    ReplyDelete