This is Sams Sporty from JSK design.He stopped into the Farm to have some Ducati suspension installed on his Evo sporty frame...( not exactly a bolt on installation ) He brought out a single sided swing arm,some inverted forks,brembo calipers,sportster dual flange front hub,and a piggyback ducati mono shock. The headstock had to be shortened a half inch to accept the bearing cups I machined.the sporty hub to fit the ducati bearings,to fit the ducati axle, then spaced it to center.The hub was then cut to fit the rotors.Next spacers were made to center rotors in the calipers..Out back the swingarm pivot bolt was scratch built and spacers made to align it.The shock was then positioned and mounted after checking clearance at full "droop" and full compression. My brother at Aced will be machining him a rear hub to accept spokes. Slim 951 217 8814 IMPEACH OBAMA!
My gast is flabbered once more mate, loved that stepped profile on the pan bobs, among many other things.
ReplyDeleteWorking Class American Pride indeed. Slim the only thing that beats your talent is your work ethic. Keep killing it man.
ReplyDeleteThanks Whiteline and Chuk,Keep pushing the American way..We as Americans are not followers ,but leaders! Slim
ReplyDelete