This super sano Ironhead was brought in to the Farm for some pipes.Mike asked for them to be inch and five eighths , for slight backpressure. then swept out with a heatshield. Thanks for stopping in Mike and family. Slim
Wednesday, April 24, 2013
Monday, April 22, 2013
slimsfab single loop frame for xs 650
This is a frame sent to me in the mail from New Mexic. It arrived as a Headstck and backbone.the rest was fabbed here at the farm. it is a single loop shortened out back just a bit, to get rid of the xs 650 "gap" between the engine and rear fender.Slim
Thursday, April 4, 2013
slimsfab death machine for Ralfy
This is Ralfys sportster. It is now long as FUCK. He came out and asked for a set of 40 over legs for his springer, so they are now made from 4130 chromoly.120 wall. I did not build this one from scratch. the bike got quite a bit of rake and a pitchfork sissybar too.this will be powered by a stroker Iron head. Ralfy will be building and painting the rest of his rig.SLIM 951 217 8814
Tuesday, April 2, 2013
Monday, April 1, 2013
Slimsfab sporty for Derek
This is Dereks sporty he represents San Pedro.This bike has been on the blog as you can see the last two shots are from the previous fab session. This time Derek came out he brought out some axle plates to be swaped onto his frame fabbed here at the Farm.In case you havent noticed the running gear is a sporty mill (1000 cc) with the trans hacked off connected to a early ratchet top 4 speed via inch and a half belt drive..The oil tank with stash tube,and Wish boned downtubes are a couple of nice features we also knocked out here. The pipes are fabbed by Derek and carry the lines of the bike out super nice. SLIMSFAB is now on Instagram....look up slimsfab for one off parts and some hard to find parts on the instagram page. SLIM 951 217 8814
Subscribe to:
Posts (Atom)